15 Best Plumbing Schools in Connecticut in 2024 | How to Apply

Are you in search of the best plumbing schools in Connecticut? Search no more; we’ve got you covered.

This article fully reviews the best plumbing schools in Connecticut, including the requirements, cost & how to apply to these schools.

Plumbing and Water Supply is Connecticut’s #27 most popular major, with 25 degrees and certificates awarded in 2019–2020.

Regarding higher education opportunities, today’s trade school students have many options. 

You are no longer limited to schools in your immediate area as online education opportunities expand. 

Even some “big-name’ universities are offering online courses. There are also several trade schools with programs you might be interested in.

Academic Ground Search has created the Best Plumbing Schools in Connecticut to assist you in your search for the best school for you, along with in-depth profiles of schools and the programs they offer.

Keep reading to find out more!

See Also: 12+ Best Plumbing Schools in Florida|Ranking

Are there Plumbing Schools in Connecticut?

There are a good number of plumbing schools in Connecticut. These plumbing schools are:

  • Porter and Chester Institute
  • Connecticut Technical Education and Career System
  • Industrial Management & Training Institute
  • Platt Technical High School
  • Construction Education Center
  • Entech Advanced Energy Training
  • Indoor Comfort Training Center

How Does One Become a Plumber in Connecticut?

All licensed plumbers in Connecticut must adhere to the state’s Department of Consumer Protection procedures. 

All newcomers to the field must register as apprentices with the Department of Labor’s Apprenticeship Training Division. 

After you register, you must enroll in a state-approved apprenticeship program. A plumber licensing exam is only available after you have completed your apprenticeship.

Connecticut has two types of licensed plumbers: journeypersons and contractors. You must complete your approved apprenticeship course before you can work as a journeyperson. 

A journeyperson can only work for a licensed contractor as an employee. You must do one of two things to work as a contractor:

  • At least two years of experience as a journeyperson
  • Show a level of skill comparable to that of an experienced journeyperson.
  • For both journeypersons and contractors, there are two levels of licensing: limited and unlimited. Limited license holders can only work on certain types of plumbing projects. Unlimited license holders can work on any project. Unlimited plumbers must have more experience than limited plumbers.

What are the Best Plumbing Schools in Connecticut?

After thorough research, rankings, reviews, and value offers, we have curated a list of the best plumbing schools in Connecticut, including the requirements, cost & how to apply.

Below are the best plumbing schools in Connecticut:

1. Porter and Chester Institute

This school will teach you how to install pipes and fixtures. You’ll learn how to repair and replace worn parts and troubleshoot faulty systems. 

You’ll also learn how to prepare client cost estimates, read blueprints, follow state and local building codes, and determine the materials and equipment required for a job.

It is not only what you learn but also how you learn. If you are a hands-on learner, you will value your time outside the classroom and in the lab working on real plumbing systems with real industry equipment.

They’ll teach you more than just basic plumbing skills; they’ll also teach you how to work with industry professionals and customers. 

They are proud of their students at Porter and Chester Institute because they make excellent employees.

Visit School

2. Connecticut Technical Education and Career System

Students enrolled in the CTECS Plumbing & Heating career program will receive instruction and demonstrate skills and knowledge in construction safety, measuring and blueprint reading, plumbing, and heating system calculations such as drainage fixture units, water supply fixture units, gas pipe sizing, calculating heat loss for hydronic heating applications. 

Also, students in the Plumbing & Heating program receive on-campus and off-campus job site training. 

Students learn how to install and repair water, waste, gas, and mechanical systems in residential and commercial buildings.

Furthermore, students enrolled in the Plumbing & Heating program will receive training in energy efficiency, environmental, renewable energy, and energy conservation practices.

Visit School

Read More: 10+ Best Plumbing Schools in Chicago|Ranking

3. Industrial Management & Training Institute

This school’s Plumbing Technician Program is designed to teach students how to install, fit, repair, and maintain residential, commercial, and industrial plumbing. 

The student is taught how to complete a job correctly while maintaining the highest sanitary standards possible. 

Students will be exposed to theory and practical “hands-on” training throughout the program. 

Three distinct plumbing systems collaborate to achieve the desired outcome in a sanitary and safe manner.

Plumbing Technician program graduates will have learned the skills required for an entry-level apprenticeship position in residential, commercial, and industrial plumbing applications. 

Many IMTI graduates complete the program to work for themselves as plumbing contractors.

Visit School

4. Platt Technical High School

Students who pursue a career in plumbing and heating will be taught the fundamentals of safety and sanitation and how to use and care for hand tools, power tools, and stationary equipment. 

The students will use basic math computations and measurements to calculate the plumbing materials and piping required. 

Students will be introduced to plumbing and mechanical codes and demonstrate basic soldering, solvent use, and steel piping techniques.

Students will investigate drain, waste, and venting installation, the use of copper tubing and steel piping, and the installation of hangers and supports. 

Pipe sizing, residential fixtures and appliances, and fitting installation are also covered. Students will install drain, waste, and vent (DWV) pipes with copper, steel, cast iron, plastic pipe, and fittings. 

Students will complete plumbing and heating projects for customers inside and outside the school as they relate to the current curriculum and their skill level.

Visit School

Read More: 14 Best Trade Schools in Connecticut

5. Construction Education Center

Plainville, Connecticut-based Construction Education Center, Inc. (CEC) is a non-profit training organization. 

On January 11, 2007, the Connecticut Commissioner of Higher Education granted the CEC permission to operate as a private occupational school. 

This distinction indicates that the CEC is permitted to provide postsecondary education programs in Connecticut. 

The CEC is also a National Center for Construction Education and Research-accredited provider (NCCER). 

However, NCCER has been a leader in construction training for over a decade, providing a standardized curriculum for over 30 construction trades.

The Construction Education Center is an official provider (#1275) of Continuing Education classes for Connecticut plumbers and electricians. 

They have received approval for the electrical requirement for 2023 and the plumbing requirement for 2023.

Also, Section 20-334d of the Connecticut General Statutes requires all electrical and plumbing license holders to obtain continuing education hours of instruction to renew their respective licenses.

Visit School

6. Entech Advanced Energy Training

This school offers continuing education in plumbing. Continuing education is required for licensed plumbers seeking license renewal. 

Every odd-numbered year, journeymen must complete 5 hours of continuing education; contractors must complete 7 hours of continuing education every even-numbered year.

Stop going to dull classes! Allow Entech to assist you in making your CEU class exciting and entertaining. 

They provide comprehensive seminars for contractors and journeymen and are approved for Plumbing Continuing Education Units by the Connecticut Department of Consumer Protection.

Visit School

Read More: 15 Best Plumbing Schools in Oklahoma

7. Indoor Comfort Training Center

Begin your plumbing career at this school and prepare to become certified. To become a licensed contractor in Connecticut, you must work as a licensed journeyperson for at least two years before taking the state exam.

Some of the subjects the students will learn to include:

  • Basic First Aid
  • The Plumbing Trade
  • Plumbing Design
  • Plumbing Installation I (a): Plumbing Materials
  • Plumbing Installation I (b): Plumbing Tools
  • Construction Blueprint Reading
  • Technical Mathematics

Visit School

How Long are Plumbing Schools in Connecticut?

Traditionally, learning and qualifying in a trade like plumbing require years of college, followed by a few years of training and apprenticeships.

When it comes to becoming a qualified plumber, there are numerous paths one can take.

If you are pursuing an NVQ Diploma Level 2, it will typically take you 1 to 2 years to obtain all the necessary plumbing qualifications. An apprenticeship typically lasts between 2 and 5 years.

How Much are Plumbing Schools in Connecticut?

Becoming a licensed plumber is not free. You can expect to pay more if you decide to take vocational courses, but it is recommended that you do so to help prepare for the exams.

The total cost of becoming a licensed plumber in Connecticut is as follows:

  • A full year of courses at a community college can cost up to $3,000.
  • P-2 Journeyman Exam – The exam costs $130, and the journeyman license costs another $120.
  • P-1 Unlimited Plumbing Contractor Examination – The examination to become a master plumber costs $130.
  • Contractor Business and Law Exam – The mandatory business and law exam cost an additional $65.00.
  • P-1 Licensure – Your final license will cost an additional fee.
  • The total minimum price is $595. This figure will rise if you attend a vocational school.

How Much Do Plumbers Make in Connecticut?

According to ZipRecruiter.com, licensed Connecticut plumbers earn an average annual salary of just over $61,000. 

The lowest-paid licensed plumbers earn approximately $30,000 per year. The starting salary is in the mid-$90,000s. Apprentices can expect to earn significantly less than their licensed counterparts.

Plumbers, along with steamfitters and pipefitters, are included in a labor category by job market researchers. Current job projections for these skilled professionals are very promising. 

Between 2018 and 2028, plumbers, pipefitters, and steamfitters can expect more than 60,000 job openings across the country. You can expect a steady demand for your services if you work in any of these fields.

Read More: 15 Best Plumbing Schools in Arkansas|Ranking


Plumbers are highly valued workers in the United States. They provide critical services to the nation’s homeowners and businesses all year. 

These services frequently include installing new water, sewer, or gas lines. Furthermore, trained plumbers can repair the systems that they install.

Working as an experienced plumber can provide a good living in most parts of the United States, including Connecticut, where veteran plumbers earn substantial annual salaries.

I hope you find this article helpful.


Is plumbing a promising career in CT?

Yes. Plumber employment is expected to grow by more than 14 percent by 2028, according to the Bureau of Labor Statistics, and job opportunities are expected to be plentiful. That means plumbers are scarce and in high demand.

How long is a plumbing apprenticeship in CT?

The Plumber and Steamfitters Apprenticeship Program last five (5) years. Apprentices earn money while learning on the job alongside journeypeople.

How do I become an apprentice in CT?

Register as an Apprentice with the Apprentice Training Division of the Connecticut Department of Labor.

Is plumbing a good-paying trade in Connecticut?

Plumbing, along with electricians, is one of the highest-paying trades. You can be confident that you will be able to support yourself and your family while also saving for your retirement years.

What subjects are needed for plumbing?

There are no required subjects for plumbing. However, it is recommended that you take the following: English. Mathematical Literacy OR Pure Mathematics Orientation in Life.


Our Recommendation

<!–- /stk-start:posts/template –-><!–- /stk-end:post/template –->
You May Also Like