Are you in search of the best welding schools in New York? Search no more, I got you covered.
You should be aware that the state has numerous welding certification schools.
Welding programs are available at community colleges and BOCES (Board of Cooperative Education Services) centers in New York State.Â
Individual classes, training programs, certificates, and certification upgrade tracks are all available at these schools.
Skill requirements and previous qualifications determine admission to courses. By definition, all welding classes focus on developing hands-on skills in terms of safety procedures.
We’ve compiled a list of the best schools in New York that offer welding training programs.
In addition, this article contains some essential fundamentals that will be useful to future welders.
See Also: 15 Best Welding Schools in California
Table of Contents
Are there Welding Schools in New York?
There are numerous welding schools in New York. Below are some of these welding schools:
- Hudson Valley Community College (SUNY)
- Mohawk Valley Community College (SUNY)
- Onondaga Cortland Madison BOCES
- Suffolk County Community College (SUNY)
- CUNY New York City College of Technology
- Apex Technical School
- Long Island Welding School
- Department of Corrections and Community Supervision
- Michael Daniel Metal Design, Inc.
- The Welding Expert Inc.
- Bergen Community College
- State University of New York
- Modern Welding School
- Rochester Institute of Technology
- New York State BOCES
You Can Find This Helpful- 15 Best Welding Schools in Alabama
How Does One Become a Welder in New York?
You must take four steps to obtain your welder’s license in New York. Because it can be quite perplexing, we will go over exactly how to do it here:
Step #1: Meet the requirements
Before you even begin taking the exam, you must ensure that you:
- Are over the age of 18
- Can read and write in English
- Have a strong moral character
This way, you’ll be able to do everything a certified welder does.
Step #2: Take the Exam
To obtain your license in New York, you must pass two major exam sets. Remember that you only need to do one of them, not both.
Let’s look at each individually to decide which is best for you.
The Manual Shielded Metal Arc Welding Process of the American Welding Society:
- Flat, horizontal, vertical, and overhead groove and filet welds
- Metal thicknesses are infinite.
- Certificates for 3G and 4G.
To weld special metals, you must obtain the corresponding certificate from the American Welding Society and the ones listed above.
- A36 base metal is required.
- Metals with thicknesses ranging from 1 inch to 18 inches must be used.
Shielded Metal Arc Welding Process: The New York State Department of Transportation Field Welder Certification Manual
- 3G and 4G.
- Positions include horizontal, flat, vertical, and overhead.
- Thicknesses are infinite.
Before welding special metals, you must obtain the corresponding New York State Department of Transportation Field Welder certificate.
- A36 base metal is required.
- Thicknesses of 1 inch to 18 inches are required.
Step #3: Background Investigation
After that, you must go through a background check. You must turn in your paperwork to the Licensing and Exams Unit.
You will require the following documents:
- Visual Acuity Test Form LIC62 Form Child Support Certification Form DPL1 Form Certification card from one of the exam sets we discussed
- Driving Permit (or photo I.D.)
- Certificate of Birth
- Social Security Number
- Proof of Residence: Marriage Certificate
Step #4: Obtaining Your License Card
After the department determines whether you meet the criteria, you will receive a letter with instructions on obtaining your license.
Read More-15 Best Welding Schools in Missouri
What are the Best Welding Schools In New York?
Below are the 15 best welding schools in New York:
#1 Hudson Valley Community College (SUNY)
Hudson Valley Community College is a branch of the State University of New York (SUNY), and its Educational Opportunity Center (EOC) in Albany and Troy offers vocational welding training. Students who complete the 400-hour welding program will be eligible for AWS, NYSDOT (3/8-inch steel plate), and OSHA industry certifications (construction safety).
Topics covered in training include, among other things, aluminum, stainless steel, and shielded metal arc welding.
Students also learn about the various types of welding positions (flat, horizontal, and overhead) and operational safety procedures.
The EOC also provides a welding certification upgrade program for professionals seeking DOT recertification or individuals seeking advanced certification through the American Welding Society.
#2 Mohawk Valley Community College (SUNY)
Students at this state community college’s Utica campus can complete a 7-course certificate program in welding to help them prepare for the state exam and employment in the field (Fall 2013).
This is a project-based, team-based program in which students learn practical communication skills and how to solve welding-related problems.
Students learn how to interpret blueprints and trade symbols and learn oxyacetylene welding, MIG (inert metal gas), and TIG (inert tungsten gas) procedures.
The program’s electives in blacksmithing, sculpture, and welding inspections are unique.
Also Read: 15 Best Welding Schools in Georgia
#3 Onondaga Cortland Madison BOCES
Students can pursue a welder/fitter training program with a 4-week internship and job shadowing opportunities through the Liverpool Career Training Center.
The curriculum is designed to meet AWS standards, and qualified graduates can take certification exams.
Students will learn various welding techniques, including MIG, TIG, pipe, and stick welding. They also learn to read blueprints, take drafting, and shop math classes.
The 812-hour program can be completed in 25 weeks on average, and according to the school’s website, 84% of graduates find immediate employment in the field.
#4 Suffolk County Community College (SUNY)
Suffolk County Community College has multiple campuses on Long Island, with the Corporate Training Center in Brentwood.
The 180-hour welding course combines on-site and online learning to teach students how to weld with gas metal, gas tungsten, and shielded metal arcs.
Students who pass the qualifying exams may also be certified using 1-inch, 3G, and 4-G welding.
While class fees cover the cost of books, materials, and equipment, students must pay additional fees for certifications.
Also Read: 15 Best Welding Schools in Ohio
#5 CUNY New York City College of Technology
This Brooklyn-based college is associated with the City University of New York (CUNY), and the Continuing Studies Center offers welding training.
Recent programs in collaboration with the Construction Technology Center have included a 42-hour course in advanced electrical arc welding.
The course is designed to prepare students for the AWS certification exams, but it also allows them to create their welding samples, such as angled pipes and surfaces.
#6 Apex Technical School
This welding school in Queens offers an undergraduate Certificate in Combination Welding Technology.
The 30-week program, or 900 credit hours, teaches the critical gas and electric welding processes required for New York welders.
Students can expect a mix of classroom and hands-on training in gas and electric welding processes, reading blueprints for metal layout and fabrication, including exotic metals, pipe welding, and tube welding, and manual and automatic cutting techniques.
Also Read: Best Welding Schools in Orlando
#7 Long Island Welding School
This AWS-certified school and testing facility is located in New York’s Westbury Industrial District.
Classes have small student-to-teacher ratios of six to seven students per class, and students can finish their education on weekends.
In an actual welding facility, students are taught a wide range of welding techniques. There are three levels of welding study available, each lasting 24 study hours and costing $2,500.
Classes are held Monday, Wednesday, and Friday from 8:00 a.m. to 12:00 p.m., from 12:00 p.m. to 4:00 p.m., or from 4:00 p.m. to 8:00. Classes are also held on Saturdays and Sundays.
Also, boot rentals are available for students preparing for AWS certification.
#8 Department of Corrections and Community Supervision
Students learn arc, oxyacetylene, inert tungsten gas (TIG), and metallic inert gas (MIG) welding and cutting techniques.
They learn to control equipment in various welding positions and many different types of joints, beads, welds, and braces. This course covers blueprint reading as well as working with layouts and diagrams.
The Welding Course aims to develop students’ entry-level welder skills.
There is a New York State Department of Labor Apprenticeship Program and an NCCER Welding Certification Training Program.
Also Read: 15 Best Welding Schools in Virginia
#9 Michael Daniel Metal Design, Inc.
Michael Daniel Metal Design provides an Introduction to Welding and Metal Sculpting course. This is not a certification program.
The course covers fundamental welding and metal sculpting techniques. Aside from welding, students will learn how to use power tools safely in metal sculpting and fabrication.
The class is designed for students with no prior welding or sculpting experience. Each cycle admits a maximum of seven students. Classes are held once a week, from 6:30 to 9:30 p.m.
Program Overview:
Introduction to Welding and Metal Sculpting Class
Duration: 5 weeks
Contact Hours: 15 hours
#10 The Welding Expert Inc.
The Welding Expert provides a variety of training options for both novice and experienced welders, including an all-inclusive welding course.
This training option begins with fundamental welding concepts and progresses to opportunities to apply what you’ve learned in real-world settings with the help of expert instructors.
Students will then progress to advanced courses like pipe welding, preparing them for ASME Code welding in all positions and thicknesses.
The program is divided into four stages. The first phase introduces students to the welding craft, followed by horizontal, vertical, and overhead plate positioning in phase two, preparation for pipe welding qualification tests or periodic code testing in phase three, and ASME IX requirements for various qualifications in phase four.
TWE currently collaborates with the New York State Department of Education on the welding specialty program using Access V.R.
They are also AWS SENSE certified, have NYSDOT welder certifications, and are an approved vendor for NYC DOB Pipe welder qualifications.
Aside from the all-inclusive course, they also offer other full-length courses, brush-up workshops, and specialty workshops for beginners, intermediates, and advanced students.
Also Read: 15 Best Welding Schools in South Carolina
#11 Bergen Community College
Bergen Community College opened its doors in 1965. Today, nearly 17.000 students are enrolled in academic degree programs at the college.
The Middle States Association of Colleges and Schools has accredited Bergen. The main campus is Paramus, a community college in Lyndhurst, and a learning center in Hackensack.
Academic programs and courses are available at Bergen Community College. The Welding Technology I course will give you an overview of the process.
Welding Technology II builds on the applications and concepts introduced in the previous course. You will have the opportunity to delve deeper into the subject.
#12 State University of New York
The State University of New York, founded in 1948, is one of the East Coast’s oldest and most well-known educational institutions.
The university offers various programs and classes to meet students’ needs and career goals. The excellent job success rate of all former students demonstrates the program’s quality.
Welding is a very futuristic and exciting program. The intensive and brief program provides access to this field’s most recent technology, equipment, and trainers.
Also Read: 15 Best Welding Schools in Virginia
#13 Modern Welding School
Modern Welding School is an excellent place to begin your career in this exciting industrial field. The school has fantastic partnerships that will assist you in obtaining the best practice and job opportunities.
The school also offers unique programs for veterans and other groups, financial planning, and assistance.
Welding programs are incredibly diverse and can be completed in full-time, part-time, day, or night classes.
The course lasts between 600 and 900 hours and takes an average of 30 weeks.
#14 Rochester Institute of Technology
Rochester Institute of Technology uses the most advanced equipment and technology in its labs and classrooms to provide the region’s best vocational and technical education.
The institute has incredible partnerships with great industrial plants, allowing students to practice their skills in real-life situations and gain unique skills and experience.
The welding program at this institute is one of the best, and it only takes a few months to complete the certificate level. You will gain the necessary skills and knowledge to apply for well-paying jobs.
Also Read: 15 Best Welding Schools in South Carolina
#15 New York State BOCES
New York State BOCES is an excellent alliance of schools, colleges, and vocational institutions that aims to give all students a fresh start in their careers.
The alliance is organized in branches throughout the state and has some of the best teaching boards in the country’s educational system.
Furthermore, the system will assist you with financial planning.
Welding is a very high-quality program in this system. This program will provide fantastic job opportunities and teach you all the necessary skills, techniques, and knowledge.
Also Read-The 10 Best Carpentry Schools in New York
How Long Are Welding Schools In New York?
Any student would understandably want to know how long it takes to finish a welding program, but there is no definitive answer.
Each school has its program, which may or may not be of a certain length.
Regardless, your education will not last more than two years.
How Much Are Welding Schools In New York?
Welding training programs at community colleges or technical schools usually range between $5,000 and $15,000.
Programs typically last two years and end with a certificate of completion.
The length of tuition and training may vary depending on location and specialization.
Non-residents pay significantly more for associate’s and bachelor’s degrees than residents.
Attending a nearby school will save you a significant amount of money.
Associate’s degrees are available in two years and range in price from $2,000 to $31,000.
A four-year bachelor’s degree costs between $40,000 and $100,000.
Welders with bachelor’s degrees are likelier to advance to positions such as welding supervisors, inspectors, instructors, or engineers.
How Much Do Welders Make In New York?
Working as a welder in New York will earn you an excellent median salary of $46 300 (or $22.26 per hour).
At the same time, the national median salary is around $39 390 per year.
The top 10% of welders in New York are paid more than $72 000 per year.
In comparison, the top 10% of welders in the United States earn an annual salary of $62 100.
Another significant point is that welding in New York has a fantastic future.
According to the U.S. Department of Labor, the number of job opportunities for welders will increase by 22 500 by 2026.
Conclusion
As you can see, New York has many welding certification schools.
You only need to make a final decision and begin training.
It is your chance to advance your career.
Don’t Miss-Best Trade Schools In Texas
FAQs
Is welding a good career choice?Â
In a nutshell, yes! It provides an excellent opportunity to find a secure job in almost any industry.
How much does it cost to start welding in New York?
To start, a quality welding machine will cost you between $200 and $400.
Is a welding school in New York worth it?
Yes, welding school can be worthwhile because employers increasingly require postsecondary welding education (BLS), according to the U.S. Bureau of Labor Statistics.
Reference
